Springvale plumbers · homes, units, shops and restaurantsinfo@springvaleplumbing.com.au📞 03 7076 1660
Home › Burst pipe first steps
Guide · Springvale VIC 3171

Burst Pipe? The First Ten Minutes

What to do straight away when a pipe bursts or a hose splits, to limit damage before the plumber arrives.

or email info@springvaleplumbing.com.au

  • Springvale based
  • Licensed plumbers and gasfitters
  • Price agreed first
  • Homes and shops
Plumber scanning a damp hallway wall with a thermal imaging camera to trace a hidden leak

1. Stop the water

Turn off the water at the meter near the front boundary. If the leak is under a sink or toilet, the small isolation valve there may stop it.

2. Stay safe around electricity

If water is near power points, appliances or light fittings, switch off power at the switchboard. Do not touch switches with wet hands.

3. Call a plumber

Ring 03 7076 1660 and describe what has happened.

4. Protect belongings

Move furniture, rugs and electronics away. Put towels down and buckets under drips.

5. Drain the pipes

Open a cold tap at the lowest point of the house to drain remaining water from the pipes.

6. Turn off the hot water

If the hot water system is affected, turn off the gas or power to it.

7. Take photos

Photograph the damage for insurance before cleaning up.

8. Tell your agent if renting

A burst pipe is an urgent repair. Contact your agent or landlord.

After the repair

Dry the area properly to stop mould. Wet plaster and timber may need professional drying.

Upstairs and unit floods

In townhouses and units, water from a burst upstairs can quickly reach the floor below. Warn your neighbours, and if you live below, turn off power to the affected rooms. Most floods in these homes start with a failed flexible hose under a basin, sink or toilet.

Preventing the next one

Replace flexible hoses older than about ten years or showing rust or bulges, fit a pressure limiting valve if your pressure is high, and know where your meter and isolation valves are.

Keep a torch near the meter

A small torch kept near the front door helps when a pipe bursts at night.

Springvale ground and pipes

Springvale sits on a mix of sandy loam and heavier clay, and much of the suburb was built in the 1950s and 1960s with earthenware sewer pipes and galvanised or early copper water pipe. Clay joints shift over time and let roots in, rusting galvanised pipe slowly narrows and leaks, and drains under subdivided blocks are often shared between homes. We use drain cameras, locators and pressure tests to see exactly what is going on before anyone digs.

Related services

More guides

Why Springvale Plumbing

Why Springvale homes and shops call us

01

Homes and shopfronts

From 1950s brick veneers to restaurant kitchens on the main strip, we work on both every week.

02

Plain explanations

We show you what we found, in plain English, with photos when they help.

03

A price before work

You get a fixed price once the fault is found. Nothing starts until you say yes.

04

Tidy and on time

We ring ahead, protect floors and take the old parts and mess away.

Get a free quote

Tell us what is happening and a licensed Springvale plumber will call you back.

How quoting works

Ring 03 7076 1660 or send the form with a short note and a photo if you can. A licensed plumber calls you back, asks a few questions and books a time. On site they find the cause, explain your options in plain English and give you a fixed price. Nothing starts until you agree, and larger jobs get a free written quote.

03 7076 1660







    Need a plumber in Springvale?

    Springvale, Springvale South, Noble Park, Keysborough and nearby suburbs. Quote-only: the plumber finds the fault first, then gives you a fixed price.

    📞 Call 03 7076 1660